TAP M217 UNC 1/2-13 HAND INTER TCA
PRODUCT DESCRIPTIONSutton Tools Carbon Hand Taps are ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.Straight flutes are designed for tapping into materials where chips break-up readily and present no disposal problems, particularly in through-hole tapping. Straight flute taps are only suitable for hand operations, tapping up to 1-1/2 x diameter.
- Straight Flutes suitable for through hole tapping up to 1-1/2 x diameter
- Intermediate lead: used after a taper lead tap and are suitable for through holes or blind holes where the thread does not need to go right to the bottom of the hole
- Square shank for use with a suitable tap wrench to drive the tap
- Made from tungsten chrome alloy
- Bright finish for general purpose applications, non-ferrous metals & plastics
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 1/2" |
| Finish | Bright |
| Pitch | 13tpi |
| Thread | 1/2" |
| Thread Type | UNC |
| Type | Intermediate |
| Diameter In mm | 12.7mm |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
TAP M217 UNC 1/2-13 HAND INTER TCA
TAP M217 UNC 1/2-13 HAND INTER TCA
PRODUCT DESCRIPTIONSutton Tools Carbon Hand Taps are ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.Straight flutes are designed for tapping into materials where chips break-up readily and present no disposal problems, particularly in through-hole tapping. Straight flute taps are only suitable for hand operations, tapping up to 1-1/2 x diameter.
- Straight Flutes suitable for through hole tapping up to 1-1/2 x diameter
- Intermediate lead: used after a taper lead tap and are suitable for through holes or blind holes where the thread does not need to go right to the bottom of the hole
- Square shank for use with a suitable tap wrench to drive the tap
- Made from tungsten chrome alloy
- Bright finish for general purpose applications, non-ferrous metals & plastics
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 1/2" |
| Finish | Bright |
| Pitch | 13tpi |
| Thread | 1/2" |
| Thread Type | UNC |
| Type | Intermediate |
| Diameter In mm | 12.7mm |
- Brand: SUTTON TOOLS
- Supplier Code: SUTTTONZ
- Supplier Part Number: M2171270
- Product Code: SUTTTONZ|M2171270
