PERMABOND - 50G CA FAST CURE NON DRIP - 2010
Permabond 2010 Cyanoacrylate (Super Glue)Viscosity: 23,000 mPa.s (Thixotropic)
Handling Time: 10 seconds, Full Strength: 24 hours
Max Temperature: 80 ?C
Max Gap Fill: 0.5 mm
WRAS Approval for potable water
This is unique because its non-drip characteristics make it ideal for bonding many porous materials and can be used on vertical or inverted surfaces. Its rapid cure and gap fill capability extend the use of 'superglues' into previously unsuitable applications.
Cyanoacrylate "superglue" adhesives are an ideal way to quickly and effectively bond and repair parts. They only take seconds to cure to handling strength, do not require any sort of mixing and they will bond most substrate materials.
They should not be used in gaps larger than 0.5mm and are not suitable for spreading over a large area.
CAUTION: Cyanoacrylate adhesives will bond skin and eyes in seconds. Contact with skin and eyes needs to be avoided. Use in a well ventilated area.
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 50g |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
PERMABOND - 50G CA FAST CURE NON DRIP - 2010
PERMABOND - 50G CA FAST CURE NON DRIP - 2010
Permabond 2010 Cyanoacrylate (Super Glue)Viscosity: 23,000 mPa.s (Thixotropic)
Handling Time: 10 seconds, Full Strength: 24 hours
Max Temperature: 80 ?C
Max Gap Fill: 0.5 mm
WRAS Approval for potable water
This is unique because its non-drip characteristics make it ideal for bonding many porous materials and can be used on vertical or inverted surfaces. Its rapid cure and gap fill capability extend the use of 'superglues' into previously unsuitable applications.
Cyanoacrylate "superglue" adhesives are an ideal way to quickly and effectively bond and repair parts. They only take seconds to cure to handling strength, do not require any sort of mixing and they will bond most substrate materials.
They should not be used in gaps larger than 0.5mm and are not suitable for spreading over a large area.
CAUTION: Cyanoacrylate adhesives will bond skin and eyes in seconds. Contact with skin and eyes needs to be avoided. Use in a well ventilated area.
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 50g |
