PERMABOND - 20G CA FOR RUBBERS & PLASTICS - 105
Permabond 105 Cyanoacrylate (Super Glue)Viscosity: 30 to 50 mPa.s
Handling Time: 5 to 10 seconds, Full Strength: 24 hours
Max Temperature: 80 ?C
Max Gap Fill: 0.10 mm
WRAS Approval for potable water
A very high purity cyanoacrylate adhesive which can be used to bond a wide range of materials that may be difficult to bond with general purpose 'super glues'. It is particularly suitable for bonding Natural rubber, Butyl rubber and EPDM. It can easily be applied direct from the bottle or via automated dispensing equipment where speed and/or precision are required.
Cyanoacrylate "superglue" adhesives are an ideal way to quickly and effectively bond and repair parts. They only take seconds to cure to handling strength, do not require any sort of mixing and they will bond most substrate materials.
They should not be used in gaps larger than 0.5mm and are not suitable for spreading over a large area.
CAUTION: Cyanoacrylate adhesives will bond skin and eyes in seconds. Contact with skin and eyes needs to be avoided. Use in a well ventilated area.
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 20g |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
PERMABOND - 20G CA FOR RUBBERS & PLASTICS - 105
PERMABOND - 20G CA FOR RUBBERS & PLASTICS - 105
Permabond 105 Cyanoacrylate (Super Glue)Viscosity: 30 to 50 mPa.s
Handling Time: 5 to 10 seconds, Full Strength: 24 hours
Max Temperature: 80 ?C
Max Gap Fill: 0.10 mm
WRAS Approval for potable water
A very high purity cyanoacrylate adhesive which can be used to bond a wide range of materials that may be difficult to bond with general purpose 'super glues'. It is particularly suitable for bonding Natural rubber, Butyl rubber and EPDM. It can easily be applied direct from the bottle or via automated dispensing equipment where speed and/or precision are required.
Cyanoacrylate "superglue" adhesives are an ideal way to quickly and effectively bond and repair parts. They only take seconds to cure to handling strength, do not require any sort of mixing and they will bond most substrate materials.
They should not be used in gaps larger than 0.5mm and are not suitable for spreading over a large area.
CAUTION: Cyanoacrylate adhesives will bond skin and eyes in seconds. Contact with skin and eyes needs to be avoided. Use in a well ventilated area.
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 20g |
