@2x.jpg
"CHEM STUD 8.8 GRADE M16X190MM GALV")
CHEM STUD 8.8 GRADE M16X190MM GALV
PRODUCT DESCRIPTIONICCONS Class 8.8 High Tensile Threaded Adhesive Studs are suitable for fastening in concrete and masonry in combination with ICCONS Chemselect adhesive injection range. These high tensile flat cut studs are hot dip galvanised suitable for extreme loads and internal or external applications - high tensile when you mean business. The studs can be embedded at flexible depths for maximum performance and cost efficiency. Studs range from M12 to M24 and are manufactured to industry standard lengths.
- Features
• Use of correct stud length and diameter saves time and money with every fastening
• No tool needed to set anchor
• Available in High Tensile Class 8.8 Carbon Steel, hot dip galvanised
• Anchor Range: M12 up to M24
Applications
• for extreme corrosive environments
• High load applications
• Fixing various steel structures to concrete substrates
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 16mm |
| Length | 190mm |
| Material | Grade 8.8 |
| Finish | Galvanised |
| Pitch | 2mm |
| Thread | M16 |
| Thread Type | Metric Coarse |
| Head | Flat Cut |
| Drive | Hex Nut |
| Hole Size | 18mm |
| Diameter In mm | 16mm |
| Components | Kit |
| Point | Flat |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
CHEM STUD 8.8 GRADE M16X190MM GALV
CHEM STUD 8.8 GRADE M16X190MM GALV
PRODUCT DESCRIPTIONICCONS Class 8.8 High Tensile Threaded Adhesive Studs are suitable for fastening in concrete and masonry in combination with ICCONS Chemselect adhesive injection range. These high tensile flat cut studs are hot dip galvanised suitable for extreme loads and internal or external applications - high tensile when you mean business. The studs can be embedded at flexible depths for maximum performance and cost efficiency. Studs range from M12 to M24 and are manufactured to industry standard lengths.
- Features
• Use of correct stud length and diameter saves time and money with every fastening
• No tool needed to set anchor
• Available in High Tensile Class 8.8 Carbon Steel, hot dip galvanised
• Anchor Range: M12 up to M24
Applications
• for extreme corrosive environments
• High load applications
• Fixing various steel structures to concrete substrates
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 16mm |
| Length | 190mm |
| Material | Grade 8.8 |
| Finish | Galvanised |
| Pitch | 2mm |
| Thread | M16 |
| Thread Type | Metric Coarse |
| Head | Flat Cut |
| Drive | Hex Nut |
| Hole Size | 18mm |
| Diameter In mm | 16mm |
| Components | Kit |
| Point | Flat |
