@2x.jpg
"STRIKE TIE WIRE 5MM")
STRIKE TIE WIRE 5MM
PRODUCT DESCRIPTIONTie Wire Head Strike Anchors (aka the proprietary name Spike Anchor) is a single piece, tie-wire, hammer in anchor for use in solid base materials such as concrete, brick, block, stone and other masonry. The S shaped kink in the Strike Anchor generates expansion forces once the anchor has been hammered into the pre-drilled hole. This anchor is a fast and economical way provide a tie-wire eyelet point in solid base materials. Strike Anchors are manufactured pre-expanded and simply require setting with a hammer, without the need for secondary tightening for installation, making it a common choice for fast installation applications. The tie-wire head is perfect for suspending ceilings, attaching cable ties, support wires and ducting systems.
- Features
• Available in mechanically galvanised carbon steel
• Tamper-proof
• Pre-expanded design
• Simple hammer-in installation
• Time efficient installation
• Countersunk head for discrete / flush finish
Applications
• Fast installation applications
• Concrete, brick, block, stone and other masonry base materials
• Suspending ceilings
• Attaching cable ties
• Support wires
• Ducting systems
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 5mm |
| Material | Metal - Steel |
| Finish | Zinc plated |
| Head | Eye |
| Drive | Hammer |
| Hole Size | 5mm |
| Diameter In mm | 5mm |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
STRIKE TIE WIRE 5MM
STRIKE TIE WIRE 5MM
PRODUCT DESCRIPTIONTie Wire Head Strike Anchors (aka the proprietary name Spike Anchor) is a single piece, tie-wire, hammer in anchor for use in solid base materials such as concrete, brick, block, stone and other masonry. The S shaped kink in the Strike Anchor generates expansion forces once the anchor has been hammered into the pre-drilled hole. This anchor is a fast and economical way provide a tie-wire eyelet point in solid base materials. Strike Anchors are manufactured pre-expanded and simply require setting with a hammer, without the need for secondary tightening for installation, making it a common choice for fast installation applications. The tie-wire head is perfect for suspending ceilings, attaching cable ties, support wires and ducting systems.
- Features
• Available in mechanically galvanised carbon steel
• Tamper-proof
• Pre-expanded design
• Simple hammer-in installation
• Time efficient installation
• Countersunk head for discrete / flush finish
Applications
• Fast installation applications
• Concrete, brick, block, stone and other masonry base materials
• Suspending ceilings
• Attaching cable ties
• Support wires
• Ducting systems
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 5mm |
| Material | Metal - Steel |
| Finish | Zinc plated |
| Head | Eye |
| Drive | Hammer |
| Hole Size | 5mm |
| Diameter In mm | 5mm |
