@2x.jpg
"CHEM STUD 5.8 GRADE M12X160MM GALV")
CHEM STUD 5.8 GRADE M12X160MM GALV
PRODUCT DESCRIPTIONICCONS Class 5.8 and 316 SS Threaded Adhesive Studs are suitable for fastening in concrete and masonry in combination with ICCONS Chemselect adhesive injection range. The studs can be embedded at flexible depths for maximum performance and cost efficiency. Studs range from M8 to M24 and are manufactured to industry standard lengths. Driver bit for use with glass capsules included in each box.
- Features
• Use of correct stud length and diameter saves time and money with every fastening
• No tool needed to set anchor (excludes glass capsule adhesive)
• Available in Class 5.8 Carbon Steel Zinc Yellow, Class 5.8 Carbon Steel Galvanised, and Stainless Steel 316 A4
• Anchor Range: M8 up to M24
Applications
• Fixing various steel structures to concrete or masonry substrates
• for extreme corrosive environments HCR (High Corrosion Resistant) Stainless Steel Studs are also available on request - lead times may apply.
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 12mm |
| Length | 160mm |
| Material | Grade 5.8 |
| Finish | Galvanised |
| Pitch | 1.75mm |
| Thread | M12 |
| Thread Type | Metric Coarse |
| Head | Stud - Hex Nut |
| Drive | External Hex |
| Hole Size | 14mm |
| Diameter In mm | 12mm |
| Components | Kit |
| Point | Chisel |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
CHEM STUD 5.8 GRADE M12X160MM GALV
CHEM STUD 5.8 GRADE M12X160MM GALV
PRODUCT DESCRIPTIONICCONS Class 5.8 and 316 SS Threaded Adhesive Studs are suitable for fastening in concrete and masonry in combination with ICCONS Chemselect adhesive injection range. The studs can be embedded at flexible depths for maximum performance and cost efficiency. Studs range from M8 to M24 and are manufactured to industry standard lengths. Driver bit for use with glass capsules included in each box.
- Features
• Use of correct stud length and diameter saves time and money with every fastening
• No tool needed to set anchor (excludes glass capsule adhesive)
• Available in Class 5.8 Carbon Steel Zinc Yellow, Class 5.8 Carbon Steel Galvanised, and Stainless Steel 316 A4
• Anchor Range: M8 up to M24
Applications
• Fixing various steel structures to concrete or masonry substrates
• for extreme corrosive environments HCR (High Corrosion Resistant) Stainless Steel Studs are also available on request - lead times may apply.
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Diameter | 12mm |
| Length | 160mm |
| Material | Grade 5.8 |
| Finish | Galvanised |
| Pitch | 1.75mm |
| Thread | M12 |
| Thread Type | Metric Coarse |
| Head | Stud - Hex Nut |
| Drive | External Hex |
| Hole Size | 14mm |
| Diameter In mm | 12mm |
| Components | Kit |
| Point | Chisel |
$2.48
Related Products
