DART ALUMINIUM BLADE 255MM 80T 25.4MM BORE
Description
DART Aluminium CuttingFine Cut - Extrusions
These aluminium saw blades are ground with a triple chip tooth configuration giving you faster cutting with less friction.
When used with aluminium saw lube they produce an incredibly smooth finish.
Perfect for sawing non-ferrous metal in extruded, flat and solid sections an aluminium cutting blade under certain conditions will cut the following materials: Aluminium, copper, lead, brass, fibreglass, plastic PVC products.
Diameter 255
Bore 25
Teeth No 80
Kerf 2.8
Plate 2.2
Tooth Type T.Chip
Weight/KG 0.91
Machine Type Hitachi, Makita
Machine Model 2704; C10FCE2; C10FCH2; C10FL; C10RC; DW703-XE; DW713; DW717; DW720; DW744-XE; EMS20255CL; GCM 10; GCM 10 M; GCM 10 S; GCM 10 SD; GKG 24V; GTS 10; GTS 10 J; GTS 10 XC; KGS331; LS1013; LS1040; LS1045; MLT100; MSC3; TS250;
Application: For cutting aluminium extrusions and sheets.
Expansion slots, Triple chip tooth, Negative rake angle, Ventilation ports, Hardened steel saw blade, Embedded tungsten tip.
Made in Australia
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Type | Aluninium |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
DART ALUMINIUM BLADE 255MM 80T 25.4MM BORE
DART ALUMINIUM BLADE 255MM 80T 25.4MM BORE
Description
DART Aluminium CuttingFine Cut - Extrusions
These aluminium saw blades are ground with a triple chip tooth configuration giving you faster cutting with less friction.
When used with aluminium saw lube they produce an incredibly smooth finish.
Perfect for sawing non-ferrous metal in extruded, flat and solid sections an aluminium cutting blade under certain conditions will cut the following materials: Aluminium, copper, lead, brass, fibreglass, plastic PVC products.
Diameter 255
Bore 25
Teeth No 80
Kerf 2.8
Plate 2.2
Tooth Type T.Chip
Weight/KG 0.91
Machine Type Hitachi, Makita
Machine Model 2704; C10FCE2; C10FCH2; C10FL; C10RC; DW703-XE; DW713; DW717; DW720; DW744-XE; EMS20255CL; GCM 10; GCM 10 M; GCM 10 S; GCM 10 SD; GKG 24V; GTS 10; GTS 10 J; GTS 10 XC; KGS331; LS1013; LS1040; LS1045; MLT100; MSC3; TS250;
Application: For cutting aluminium extrusions and sheets.
Expansion slots, Triple chip tooth, Negative rake angle, Ventilation ports, Hardened steel saw blade, Embedded tungsten tip.
Made in Australia
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Type | Aluninium |
