QUICK FIT TAP M105 M8X1.25 INTER. INCLUDES TAPPING DRILL 6.8
PRODUCT DESCRIPTIONSutton Tools Impact Taps are specifically developed for use with the high-torque output of an impact driver. Suitable for steel, aluminium, brass, cast iron, plastic and nylon. Impact taps are ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical. Tapping with an impact driver is approximately 20 times faster than hand tapping ? only three seconds to tap a hole!Not suitable for precision, safety or critical threads. For tapping up to 1-1/2 x diameter.*Drill not included for sizes M10 & M12
- 20X faster ? 3 seconds to tap a hole
- 1/4" hex shank suits impact drivers
- Straight Flutes suitable for through hole tapping up to 1-1/2 x diameter
- Intermediate lead suitable for through holes or blind holes where the thread does not need to go right to the bottom of the hole
- Made from tungsten chrome alloy
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Finish | Bright |
| Pitch | 1.25mm |
| Thread | M8 |
| Drive | 1/4" Hex |
| Type | Impact |
| Components | Set |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
QUICK FIT TAP M105 M8X1.25 INTER. INCLUDES TAPPING DRILL 6.8
QUICK FIT TAP M105 M8X1.25 INTER. INCLUDES TAPPING DRILL 6.8
PRODUCT DESCRIPTIONSutton Tools Impact Taps are specifically developed for use with the high-torque output of an impact driver. Suitable for steel, aluminium, brass, cast iron, plastic and nylon. Impact taps are ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical. Tapping with an impact driver is approximately 20 times faster than hand tapping ? only three seconds to tap a hole!Not suitable for precision, safety or critical threads. For tapping up to 1-1/2 x diameter.*Drill not included for sizes M10 & M12
- 20X faster ? 3 seconds to tap a hole
- 1/4" hex shank suits impact drivers
- Straight Flutes suitable for through hole tapping up to 1-1/2 x diameter
- Intermediate lead suitable for through holes or blind holes where the thread does not need to go right to the bottom of the hole
- Made from tungsten chrome alloy
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Finish | Bright |
| Pitch | 1.25mm |
| Thread | M8 |
| Drive | 1/4" Hex |
| Type | Impact |
| Components | Set |
- Brand: SUTTON TOOLS
- Supplier Code: SUTTTONZ
- Supplier Part Number: M1050800
- Product Code: SUTTTONZ|M1050800
