PERMABOND - ES550 310ML SINGLE PART HEAT CURE EPOXY
Permabond ES550 Single-Part EpoxyViscosity: 1,000,000 to 2,000,000 mPa.s
Service Temperature: -40 to 180 ?C
Max Gap Fill: 3.0 mm
Toughened, non-sagging at curing temperature, high temperature resistance, and good thermal conductivity.
Benefits:
- High peel strength increases design versatility
- No requirement for weighing or mixing material
- Durability increases material choices
- Rapid full cure increases production rates
- Solvent free improves workplace safety
- Low odour improves workplace environment
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 310ml |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
PERMABOND - ES550 310ML SINGLE PART HEAT CURE EPOXY
PERMABOND - ES550 310ML SINGLE PART HEAT CURE EPOXY
Permabond ES550 Single-Part EpoxyViscosity: 1,000,000 to 2,000,000 mPa.s
Service Temperature: -40 to 180 ?C
Max Gap Fill: 3.0 mm
Toughened, non-sagging at curing temperature, high temperature resistance, and good thermal conductivity.
Benefits:
- High peel strength increases design versatility
- No requirement for weighing or mixing material
- Durability increases material choices
- Rapid full cure increases production rates
- Solvent free improves workplace safety
- Low odour improves workplace environment
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 310ml |
