PERMABOND - 50ML MEDIUM STRENGTH GASKET MAKER - A136
Permabond A136 Anaerobic Gasketmaker.Handling Time: 45 min, Full strength: 24 hours
Maximum Temperature: 150 ?C
WRAS Approval for potable water
An anaerobic material designed for making 'formed in situ' gaskets between metal surfaces. It is capable of replacing a wide range of 'conventional' gaskets thereby offering potential for reduced stock holdings. By allowing surface to surface contact load transmission can be improved. As the product does not shrink, creep or relax after curing no bolt retightening is required. Its excellent chemical resistance allows its use with a wide variety of gases and liquids.
Benefits of Liquid Gaskets:
-Use instead of pre-cut gaskets
-One bottle for all gaskets = reduced inventory
-Vibration proof - will not loosen over time
-No "bedding in" compression relaxation - no servicing required
-Better stress distribution
-Easy to apply
-Will not degrade - no loose particles to block valves
-Will not creep or shrink
-Parts can be disassembled easily
-100% metal to metal contact, adhesive fills all voids and creates a much better seal
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 50ml |
Delivery fees may be applied at checkout. Please contact us if you would like a quote for delivery.
PERMABOND - 50ML MEDIUM STRENGTH GASKET MAKER - A136
PERMABOND - 50ML MEDIUM STRENGTH GASKET MAKER - A136
Permabond A136 Anaerobic Gasketmaker.Handling Time: 45 min, Full strength: 24 hours
Maximum Temperature: 150 ?C
WRAS Approval for potable water
An anaerobic material designed for making 'formed in situ' gaskets between metal surfaces. It is capable of replacing a wide range of 'conventional' gaskets thereby offering potential for reduced stock holdings. By allowing surface to surface contact load transmission can be improved. As the product does not shrink, creep or relax after curing no bolt retightening is required. Its excellent chemical resistance allows its use with a wide variety of gases and liquids.
Benefits of Liquid Gaskets:
-Use instead of pre-cut gaskets
-One bottle for all gaskets = reduced inventory
-Vibration proof - will not loosen over time
-No "bedding in" compression relaxation - no servicing required
-Better stress distribution
-Easy to apply
-Will not degrade - no loose particles to block valves
-Will not creep or shrink
-Parts can be disassembled easily
-100% metal to metal contact, adhesive fills all voids and creates a much better seal
Consult the Data Sheet at this link
For critical applications, please check with the manufacturer as specifications can change without notice.
| Specifications | |
|---|---|
| Volume | 50ml |
